Model S Plaid (2025+) Wrap Maker

Design a custom wrap for a 2025-or-later Model S Plaid on the template Tesla publishes specifically for that car.

Template size

1024 × 1024 px

Aspect ratio

1:1 square

Max file size

1 MB PNG

Filename limit

30 characters

Template 1024×1024. Model S Plaid from 2025 onward.

Tap any panel to paint it. Each outlined area is a separate part of the car. Add an image if you want to place artwork as well.

Paint a panel

Loading panels…

Background

Guide only — the panel lines are never included in your download.

Saves as My Wrap.png

Everything runs in your browser — your image is never uploaded. Templates load directly from Tesla’s official repository.

Model S Plaid (2025+) wrap template size

Tesla's Model S Plaid (2025+) template is 1024 × 1024 pixels — a 1:1 square, like ten of the other eleven templates Tesla publishes. That size is not a suggestion. The template is a flat unwrap of the car's body panels, so every pixel maps to a fixed place on the vehicle. Change the proportions and the mapping still happens — your artwork just arrives distorted.

Tesla accepts PNGs from 512px up to 1024px per side, but there is no reason to go below the ceiling: the image is stretched over an entire car, and a 512px file looks soft in person. Export at 1024 × 1024, keep it under 1 MB, and name the file with 30 characters or fewer — letters, numbers, spaces, dashes and underscores only. Anything outside that set and the wrap tends to fail quietly rather than throw an error. The wrap size guide covers the full rule set.

Is this the right template for your car?

Covers: Model S Plaid from 2025 onward.

How to confirm this is your template:

The mistake to avoid: Defaulting to the Model S (2021+) sheet because the two cars look alike. Tesla would not publish a second file for the 2025 Plaid if the first one fit it.

Closely related templates, if the description above does not match your car:

Designing for this body

Plaid bodywork is aggressive at both ends but the doors are still a long, flat canvas. Anchor your design to the doors and let the ends carry color rather than detail.

Where this template comes from

Tesla publishes the templates itself, in the teslamotors/custom-wraps repository. The Model S Plaid (2025+) sheet lives in models-2025-plaid/, and the editor above loads that exact file straight from Tesla's repo in your browser. Nothing is rehosted here and nothing you draw is uploaded anywhere — the design stays on your machine until you export it.

Worth knowing: Tesla's own README describes the templates as "512x512 to 1024x1024", which is why so many third-party wrap tools assume a square canvas. The Cybertruck file on disk is 1024 × 768. We read the dimensions from the PNGs rather than the documentation.

After you export

A finished Model S Plaid (2025+) wrap goes into Paint Shop one of two ways: through the Tesla mobile app, which needs app version 4.59.0 or later and vehicle software 2026.26 or later, or from a USB drive. The two routes have separate slots — 10 wraps from the app and 10 from USB, not 10 in total. The upload guide walks through both. If the file goes across and then never appears in the car, the troubleshooting page lists the usual causes — an oversized file and an illegal filename character between them account for most of it.

All 12 templates

Wrap makers for other Teslas

Tesla ships a separate template per body and, on some cars, per trim. Pick the one that matches your Model S exactly — a wrap built on the wrong sheet will not line up.

Cybertruck

Cybertruck 1024 × 768 px · not square

Model 3

Model 3 1024 × 1024 px Model 3 Standard & Premium (2024+) 1024 × 1024 px Model 3 Performance (2024+) 1024 × 1024 px

Model Y

Model Y 1024 × 1024 px Model Y Standard (2025+) 1024 × 1024 px Model Y Premium (2025+) 1024 × 1024 px Model Y Performance (2025+) 1024 × 1024 px Model Y L 1024 × 1024 px

Model S

Model S (2021+) 1024 × 1024 px Model S Plaid (2025+) 1024 × 1024 px · you are here

Model X

Model X (2021+) 1024 × 1024 px

Not sure which one you need? Start from the Tesla wrap maker overview.

Keep going

Related guides & tools

Tesla Wrap Size Guide Every template dimension, the file size ceiling and the filename rules in one place. How to Upload a Tesla Wrap Getting a finished PNG into Paint Shop from the app or from a USB drive. Tesla Wrap Not Showing Up Why an uploaded wrap silently fails to appear, and how to fix each cause.

FAQ

Frequently Asked Questions

What size should a Model S Plaid (2025+) wrap be?
Tesla's Model S Plaid (2025+) template is 1024 × 1024 pixels, so export your PNG at exactly that size. Keep the file under 1 MB and the filename to 30 characters or fewer, using only letters, numbers, spaces, dashes and underscores.
Does a Model S Plaid (2025+) wrap have to be square?
Yes. Tesla's Model S Plaid (2025+) template is 1024 × 1024, a 1:1 square. Eleven of Tesla's twelve templates are square — only the Cybertruck is different, at 1024 × 768.
Which cars does the Model S Plaid (2025+) template cover?
Model S Plaid from 2025 onward. Quick check: Check the delivery date on your order page: this template starts with the 2025 cars.
Can I use the Model S (2021+) template on a Model S Plaid (2025+)?
No. Tesla publishes them as separate templates because the bodywork differs, so the panel layouts are not interchangeable. A wrap built on the wrong sheet uploads fine and then sits out of register on the car.
Do I need a particular Tesla app or software version to upload a wrap?
To upload from your phone you need Tesla app 4.59.0 or later and vehicle software 2026.26 or later. Otherwise you can load wraps from a USB drive. The two routes have separate slots: 10 wraps from the app and 10 from USB.

WhatsMyTools is not affiliated with, endorsed by, or sponsored by Tesla, Inc. Tesla, Model 3, Model S, Model X, Model Y and Cybertruck are trademarks of Tesla, Inc.